Ligne de fente simple pour le goujon en métal et la voie
Informations de base
Modèle: ZT-002
Description du produit
Ligne de fente simple pour le goujon en métal et la voie
Cette machine de ligne de refendage en métal, nous avons spécialement conçu pour fendre la feuille de largeur à la feuille mince et puis faire la voie et le goujon. Normalement parlant, l'épaisseur pourrait être contrôlée entre 0,3 et 1,0 mm. Voici une des images de ligne de refendage entière pour votre référence:
Procédé de production de ligne de refendage en acier
decoiler, dispositif de guidage, dispositif de refente, dispositif de coupe, dispositif de mesure de longueur, dispositif d'extension, recoiler, voiture de bobine, station hydraulique, système de commande de PLC.
Paramètres de production:
Processing material: |
ALUZINC, or ALUMINIUM or STAINLESS STEAL |
Material thickness |
0.5-0.8mm |
Material hardness |
195 mpa---350 mpa |
Materisl width |
Max 1000 mm |
Inner diameter |
508mm |
Max out diameter |
1200mm |
Max weight |
Max weight: 5 T |
Configurations |
Decoiler, Slitting device, Cutting device, Recoiler |
||
Decoiler specifications
|
Max coil weight: |
5 T |
|
Inner diameter: |
GI 508mm |
||
Max out diameter |
1250mm |
||
Hydraulic station power: |
3 kw |
||
Decoiler speed: |
0-25m/min |
||
Finished product specifications:
|
width tolerance: |
0.5mm |
|
Min slitting width: |
25 mm |
||
Forming steps |
10 rollers |
||
Shaft diameter |
40mm |
||
Design type |
Memorial arch |
||
Slitting device specifications |
Slitting speed: |
0-25mm/min |
|
Driving motor: |
15 Kw |
||
Slitting shaft diameter |
Ф100mm |
||
Shearing blade |
9 pieces |
||
Max slitting pieces |
10 pieces |
||
Min slitting width |
25 mm |
||
Shearing blade material: |
9CrSi |
||
Pinching roller: |
2 couples |
||
Cutting device.
|
Cutting thickness |
0.3-1.0mm |
|
Cutting length |
500-4000mm |
||
Cutting width |
900-1250mm |
||
Cutting speed: |
4-15m/min |
||
Recoiler specifications:
|
Max coil weight: |
5 T |
|
Inner diameter: |
508/610mm |
||
Max out diameter: |
1250mm |
||
Recoiler motor: |
7.5Kw |
||
Hydraulic station power: |
3Kw |
||
Recoiler speed: |
0-25m/min |
||
|
Voltage |
220v/60hz/3ph(or as required) |
|
l équipement standard de machine
5T decoiler |
1 set |
Slitting device |
1set |
Extension device |
1 pc |
5T coiler |
1 set |
Coil car |
1 pc |
Hydraulic Station |
2pcs |
|
|
Delivery Terms: - Shipment within 60 days after receipt of down payment. Payment Terms: Payment of the contract with following schedule: - 30%: The payment shall pay by T/T the downpayment to the Seller within 15 days after the signature of the Contract. The Contract then comes into effect. - 70%: The buyer shall pay to the seller 70% of total contract amount before the seller`s ship the machine to XINGANG, CHINA. Equipment Manufacturing and Inspection/Test 1. The Seller manufactures the equipment according to the relevant standards strictly and tests the equipment according to the technical documents. 2. The Buyer shall inspect and test the commodities at the Seller`s factory at the Seller informs to confirm their conformity to the Contract Specifications. If the Buyer fails to arrive on time, the Seller shall have the right to deliver the goods according to the date stipulated in the Contract. T Technical Documents The Seller shall submit the following documents in English: 1. Foundation Plan (including the arrangement of water, electricity and air etc.) 2. Arrangement Plan 3. Operation Instruction (including the structure diagrams of the equipment, operation instruction, maintenance and trouble shooting, safe rules, consumable parts list and purchased parts list) I Installation, Commissioning, Test and Training 1. The engineers from the Seller shall supervise the installation on site and fulfill the commissioning. They should start off within 10 days after they get the information from the Buyer. 2. The Seller trains the operators of the Buyer during the commissioning 3. Commissioning: about 3 engineers in 30 days. 4. The Buyer shall pay for the international air tickets and the local, such as board and lodging, daily transportation, communication,Insurance, etc. The Buyer shall pay USD 50 /day /person to the Seller for the commissioning. 5. The Buyer shall prepare an interpreter for better communication between the two sides. |
Voici quelques photos de machines pour votre référence :
C'est le système de contrôle de PLC, ici vous pouvez ajuster la vitesse fonctionnante de machine, fendant le proess et d'autres.
C'est le dérouleur, par celui-ci, vous pouvez charger la bobine.
Ceci est très simple ligne de refente, cette machine est très bonne pour ceux qui construisent juste l'usine au tout début et ont un petit budget. Cette ligne de refendage est très économique.
Groupes de Produits : Ligne/coupe à la longueur de la ligne de refendage